Simple Green d Pro 5®

AUTHORIZED RETAILERS

    Simple Green d Pro 5®

    Simple Green d PRO 5 industrial cleaner, deodorant, disinfectant, sanitizer, fungicide mildewstat, and virucide. Kills the coronavirus (SARS-Related Coronavirus 2) that causes COVID-19 and Cold & Flu Virus on hard, non-porous, non-food surfaces.

    • Disinfectant. Use on washable hard, non-porous surfaces
    • Effective sanitizer for use on pre-cleaned food contact surfaces
    • Concentrated, one-step, hospital use disinfectant
    • Deodorizes by killing microorganisms that cause offensive odors
    • For Institutional & Industrial Use
    • Kills most viruses
    • Fungicide, kills the athlete's foot fungus
    • Inhibits the growth of mold and mildew when used as directed

    Simple Green d Pro 5®

    5 Gallons

    Simple Green d Pro 5®

    55 Gallons

    Simple Green d Pro 5®

    275 Gallons

    Preparation of Disinfectant Use-Solution: Mix 2 oz. per gallon of water (1:64).

    DISINFECTION / VIRUCIDAL* / FUNGICIDAL / MOLD AND MILDEW CONTROL DIRECTIONS:

    Apply use-solution to hard, nonporous surfaces, thoroughly wetting the surfaces, with a cloth, mop, sponge, sprayer or by immersion. Treated surfaces must remain wet for 10 minutes. Wipe dry with a cloth, sponge or mop or allow to air dry. For heavily soiled areas, a preliminary cleaning is required. For sprayer applications, use a coarse spray device. Spray 6 - 8 inches from surface; rub with brush, sponge or cloth. Avoid breathing spray.

    U.S. PUBLIC HEALTH SERVICE FOOD SERVICE SANITIZATION RECOMMENDATIONS CLEANING AND SANITIZING:

    Equipment and utensils shall be thoroughly pre-flushed or pre-scraped and when necessary, pre-soaked to remove gross food particles and soil.
    1. Thoroughly wash equipment and utensils in hot detergent solution.
    2. Rinse utensils and equipment thoroughly with clean water.
    3. Sanitize equipment and utensils by immersion in a use solution of 1 oz. Simple Green d Pro 5 per 1 gallon of water (400 ppm active quat) (or equivalent dilution) for at least 60 seconds at a temperature of 75°F.
    4. For equipment and utensils too large to sanitize by immersion, apply a use solution of 1 oz. Simple Green d Pro 5 per 1 gallon of water (400 ppm active quat) by rinsing, spraying or swabbing until thoroughly wet.
    5. Allow sanitized surface to drain and air dry. Do not rinse.

    TO SANITIZE NON-FOOD CONTACT SURFACES:

    Mix 1/2 oz. of Simple Green d Pro 5 per gallon of water to sanitize hard nonporous surfaces. Treated surfaces must remain wet for 60 seconds. Wipe or dry with a sponge, mop or cloth or allow to air dry.

    Before use in federally inspected meat and poultry food processing plants and dairies, food products and packaging materials must be removed from the room or carefully protected.

    Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse.

    Do not use on utensils, glassware and dishes as a disinfectant.

    For mold and mildew:

    At 2 oz. per gallon, Simple Green d Pro 5 will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard, nonporous surfaces. Follow disinfection instructions. Repeat treatment every seven days, or more often if new growth appears.

    For a list of ingredients, please see our Ingredients Disclosure page.

    Compliance Documentation

    In accordance with OSHA standards, Safety Data Sheets are available for all Simple Green Products.

    SEE ALL SAFETY DATA SHEETS