Simple Green Clean Finish® Disinfectant Cleaner
Cleans, disinfects and deodorizes when used according to disinfection directions. Use on hard non-porous surfaces. Effective against a broad-spectrum of microorganisms including bacteria, antibiotic resistant bacteria, and viruses.
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
This product is not for use on critical or semi-critical medical device surfaces.
Fill or refill the Simple Green Clean Finish Disinfectant Cleaner spray bottle with this product. Pour product into spray bottle over sink or tub basin.
GENERAL CLEANING: Spray soiled area then wipe with a dry paper towel or lint-free cloth.
SANITIZE NON-FOOD CONTACT SURFACES and DEODORIZE: To sanitize/deodorize hard, non-porous surfaces hold container six to eight inches from the surface to be treated. Spray area until it is covered with the product. Allow surface to remain visibly wet for 5 seconds. Let surface dry. For heavily soiled surfaces, a pre-cleaning step is required. For surfaces that may come into contact with food, a potable water rinse is required.
DISINFECTING, DEODORIZING: Remove gross filth or heavy soil prior to application of Simple Green Clean Finish Disinfectant Cleaner. Apply product with a hand pump trigger sprayer. Hold sprayer six to eight inches from the surface to be treated. Spray area until it is covered with the product. Allow surface to remain visibly wet for the entire wet-contact time duration. No scrubbing necessary. Allow treated surfaces to air dry or wipe off with clean cloth.
When using on food contact surfaces: counter tops, stovetops, highchairs, kitchen appliances, thoroughly rinse all treated surfaces with potable (tap) water after the wet-contact time has been reached. This product must not be used to clean eating utensils, glassware and dishes.
In accordance with OSHA standards, Safety Data Sheets are available for all Simple Green Products.