When in doubt about a surface, always spot test first.

Hard Surfaces

1. Pre-wet the surface.
2. Apply full strength Simple Green to all affected areas.
3. Scrub with a soft bristle brush or non-abrasive scrubbing pad.
4. Rinse with clean water.
5. Dry with lint free cloth or allow to air dry.

Fabric or Carpet

1. Remove any gross soils from surface.
2. Dampen stains with clean water.
3. Spray full strength Simple Green onto stain.
4. Allow a few minutes for the solution to penetrate the soil.
5. Gently rub and blot with clean damp towel or absorbent cloth.