How to clean bicycles
How to clean bicycles

HOW TO CLEAN A BICYCLE


What You Need

  • Hose or bucket of water
  • Chain lubricant
  • Empty container (optional)

Regular bike cleaning and washing does more than keep your bicycle looking good – it prevents accelerated damage or corrosion from dirt and grease build-up that can chew into your drivetrain and other mechanical parts. Cleaning on a schedule can also help you find wear and tear at the start, and as they say, an ounce of prevention is worth a pound of cure. Or, in this case, some costly repairs.


Cleaning a road bike monthly is advised, while a mountain bike will require more frequent upkeep. Cleaning is also advised any time you ride in muddy or wet conditions.

Directions For Cleaning A Bike:

  1. Rinse down your bike with hose, sponge or wet cloth - Use a hose or bucket of water and a sponge or cloth to wet the entire surface of your bike.
  2. Clean the drivetrain - Spray Simple Green Bike Cleaner & Degreaser directly into your drivetrain, use a toothbrush to work into smaller areas and penetrate tough grime, dirt & grease.
  3. Clean the chain – You can soak your chain in Simple Green, or hand-clean it directly.
    • For soaking: Remove the chain from your bike, and submerge it in a 50/50 mix of Simple Green and water in a bucket or other container. Soak the chain for 5-7 minutes before rinsing with water and thoroughly drying. Re-lubricate the chain prior to putting it back on your bike
    • For hand cleaning. Use a cloth soaked in Simple Green to loosely wrap around the chain, and run the pedal so the chain moves through the cloth. For dirtier chains, you’ll need to use a scrub brush or toothbrush to work out the grime, being careful to work out any buildup between the gears.
  4. Rinse - Rinse the bike with fresh water, then check to make sure you’ve shifted all the grime off the bike, gently brushing again before rinsing where necessary.
  5. Lube the chain – Slowly pedal the bike, dripping the lubricant onto the links as they move. Wipe off any excess lubricant.
 

Bonus tip: Use Simple Green All-Purpose Cleaner as a laundry pre-treat to remove grime and grease from your cleaning cloths. Dampen the cloths with water, apply full-strength Simple Green and rub in gently. Wash as usual.

WHERE TO BUY

Sign Up For Our Newsletter

Join Our Mailing List