Simple Green Household

HOUSEHOLD

Simple Green Industrial

INDUSTRIAL

Simple Green Professional

PROFESSIONAL

AUTHORIZED RETAILERS

Simple Green® Deck & Fence Cleaner - Pressure Washer Concentrate

Simple Green Deck and Fence Cleaner is specially formulated to remove environmental pollution, dirt and grime from decks, fences, and other outdoor structures. It brightens and rejuvenates wood and composites as it cleans.

  • Concentrated formula
  • Makes up to 21 gallons
  • Cleans and brightens wood
  • Non-corrosive formula
  • Non-acidic formula
  • Will not harm landscaping
  • Cleans up to 3,800 sq. ft.
  • Use on decks and fences

BEFORE USE

  1. Always wear eye protection.
  2. Saturate plants, shrubs and grass with water.
  3. Keep others and animals away from work site.
  4. Test pressure washer for surface compatibility, with and without the cleaner, in an inconspicuous area. Rinse and allow surface to dry before proceeding.
  5. It is best to pressure wash during early morning or dusk hours when the sun is not as intense, or on an overcast, non-windy day.
  6. Do not allow product to dry on surface before rinsing.
  7. Do not allow contact on any deteriorated painted, sealed, or stained surfaces unless you intend to refinish.
  8. Pressure washing alone may remove old paint and stains and should be tested on surface prior to cleaning.
  9. For vertical surfaces, solution should be applied working from the bottom up and rinsed using fresh water from the top down to prevent streaking.

APPLICATION DIRECTIONS

  • Put pressure washer siphon tube into solution.
  • Use low-pressure spray nozzle to apply solution to surface.
  • Remove the siphon tube from the container.
  • Rinse with a high-pressure nozzle.
  • Saturate plants, shrubs and grass with water after cleaning.
  • Before storage, rinse pressure washer parts thoroughly.
  • For extremely light soils, pre-dilute this product 50/50 with water and follow the instructions above.

    • MANUAL CLEANING

  • Dilute 1-measure of Simple Green with 10-measures of ambient water (Example: In a clean bucket, add 2 cups of Simple Green to 1 gallon + 1 quart of water).
  • Clean in sections using a soft bristle brush.
  • Allow the cleaning solution to remain on the surface for several minutes, but not to dry.
  • Rinse with a garden hose, at highest pressure possible.
  • Move to a new section and repeat.

    • For a list of ingredients, please see our Ingredients Disclosure page.

    Compliance Documentation

    In accordance with OSHA standards, Safety Data Sheets are available for all Simple Green Products.

    SEE ALL SAFETY DATA SHEETS