HOW TO CLEAN A DECK

Simple Green Oxy Solve Deck and Fence Cleaner is ideal for both manual and pressure washing your entire deck. This product easily lifts and powers away dirt, grease and sap from wood and composite surfaces.

An important note, if using a pressure washer, avoid using the maximum pressure setting, as too much force can damage the wood fibers. Spot test on a remote or hidden part of the deck to ensure appropriate pressure.

DIRECTIONS FOR CLEANING A DECK:

USING A PRESSURE WASHER

1. Clear the surface of your deck and sweep thoroughly. Hose down the deck.
2. Place the pressure washer's siphon and filter into your Oxy Solve Deck and Fence Cleaner container, or pour into the pressure washer's detergent reservoir.
3. Apply Simple Green Deck and Fence Cleaner to your deck in sections, keeping the tip at least 2 feet from the surface of your deck.
4. Allow 5-10 minutes for the solution to loosen soils. Do not allow the solution to dry on the surface.
5. Scrub visibly dirty areas lightly to remove heavy soils.
6. Rinse well with your pressure washer, making sure to go with the grain of your deck. Be sure to remove all cleaner and lifted dirt from your deck.

MANUAL APPLICATION

1. Clear the surface of your deck and sweep thoroughly. Hose down the deck.
2. Mix 1.5 cups Simple Green Oxy Solve Deck and Fence Cleaner per two gallons of water.
3. Apply the solution in sections, using a pump sprayer or soft, non-abrasive brush.
4. Allow 5-10 minutes for the solution to loosen soils. Do not allow the solution to dry on the surface of your deck.
5. Scrub visibly dirty areas lightly to remove heavy soils.
6. Rinse well with hose, making sure to remove all cleaner and lifted dirt from your deck.

Not for use on untreated wood.