How To Clean Stove Top Grates
How To Clean Stove Top Grates

HOW TO CLEAN STOVE TOP GRATES


No matter how diligently you try to clean as you go, grease, sauces and soups are bound to spill, splatter and get baked onto your gas stove grates. This caked-on grime can accumulate and turn porcelain, stainless steel and cast iron grates black and crusty. The easiest way to keep your cooktop clean might be to just stop using it altogether (pause for laughter).


Not only do greasy gas burner grates make your oven look dirty, they can also affect your cooking, present a fire hazard and expose you to harmful bacteria left behind by old food. Even if you manage to avoid food poisoning and accidental fires, dirty stove grates will undoubtedly lead to smoke that can set off your smoke detectors.


You may be inclined to reach for a commercial oven cleaner to clean grease off your stove top grates. Despite their convenience, these are often a harsh cocktail of various chemicals, including lye and petroleum distillates. A popular alternative method involves soaking grates in sealed plastic or trash bags with half a cup of ammonia. This may work well, but ammonia is an extremely strong chemical that requires you to wear gloves and a respirator mask.


Cleaning stove top grates with vinegar, baking soda or myriad other natural methods is safer than cleaning with ammonia, but may simply not be strong enough and will require a lot of tough scrubbing.



Directions for Cleaning Gas Stove Top Grates:


Allow the stove burners to cool completely before cleaning. Use caution and avoid getting the pilot light and electric starters (igniters) wet.


  1. Let the grates cool. You should never start cleaning stove grates while they're still hot.
  2. Remove pieces. Remove the grates and the burner caps from the burner heads.
  3. Prepare your sink. Plug your sink drain and place all pieces in the sink.
  4. Pour Simple Green. Fill the basin with warm water to cover the parts and add 2 cups of Simple Green All-Purpose Cleaner.
  5. Soak. Leave the pieces to soak in the solution for about 20 minutes (while you clean the rest of your stove).
  6. Scrub. If necessary, scrub using a scouring pad on non-coated grates and a sponge or soft brush on coated grates.
  7. Dry. Make sure you dry all of the pieces thoroughly before replacing them or you risk damaging your igniters. You can use a cloth or let them air dry.
  8. Re-light. If pilot has been extinguished, it needs to be re-lit. All burners should be tested.

WHERE TO BUY

Bunnings Warehouse
Mitre10
Itm
Opd
Placemakers
Archant
Ccr Nz
Counter Concepts Nz
Counties Cleaning
Pet Nz
Pet Essentials Nz
Pet Stock
Read Bros Hardware
Waikato Cleaning
Hammer Hardware
Sign Up For Our Newsletter

Join Our Mailing List