How to Deep Clean & Season Cast Iron
How to Deep Clean & Season Cast Iron

HOW TO DEEP CLEAN & SEASON CAST IRON


Your beloved cast iron cookware heats evenly, can go from the stovetop to the oven and back again, and is naturally nonstick – that is, if it's properly cared for.


Cast iron cookware is handled differently than other nonstick cookware. It can be easily wiped clean, so you don't need to scrub with soapy water or throw it in the dishwasher. However, there will come a time when your cast iron pots and pans will need to be deep cleaned and then re-seasoned. Perhaps you've cooked a delicious fish meal one week, and want to make eggs for the family the next. When you don't want those flavors mixing, or when your cast iron starts to look dull, break out the Simple Green All-Purpose Cleaner.


What makes cast iron unique is the ability to create a hard, black, nonstick layer that gives it a shiny appearance, called the patina. This type of iron is so porous that fats cooked in it fill in the pores and seal the surface. "Seasoning" is the process that creates this layer, prevents the pan from rusting, and makes it nonstick. Over time, the fats and oils from the food you cook using your cast iron will form that seasoning, enhancing the flavor and complexity of taste in your food.


Since it's so important that this layer of fats remain on the pan, how should you clean and reuse it? If you clean your cast iron while it's still warm after cooking, a quick wipe with a cloth or paper towel may be the only cleaning you need to do. To get rid of stuck-on food, it's best to boil some water in the cookware or lightly scrub the surface with coarse salt to loosen it. If necessary, use a stiff brush for scrubbing, as long as the bristles aren't metal or abrasive, as those will cut into your seasoned surface.


If you do use water to clean your cast iron, it is imperative that you dry it immediately to prevent rusting. The right choice of cleaners is important as well. Simple Green All-Purpose Cleaner is great for this cleaning job, because it wont corrode the metal you're cleaning.


After you've cleaned your cookware, it's a good idea to coat it with a very thin layer of oil and rub it in using a paper towel or cloth before storing it. This will help to protect the metal and maintain its nonstick surface. You can also line your cast iron with a paper towel to keep it dry and rust-free when not being used.


Directions for Deep Cleaning a Cast Iron Pan

Lye solutions are often recommended for deep cleaning cast iron surfaces. However, lye is extremely corrosive and can cause chemical burns, permanent injuries, scarring and blindness.

  1. Wet the pan before cleaning. This will help the Simple Green penetrate soils and make the cast iron easier to clean.
  2. Spray on full strength Simple Green All-Purpose Cleaner. Allow the product to soak for a minute or so to start breaking down the greasy layer of seasoning.
  3. Scrub the pan. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation to help loosen cooking residue.
  4. Rinse with clean water. Run the pan under hot water to rinse away the grease and Simple Green mixture.
  5. Dry immediately. We can't stress enough how important it is that you dry your cast iron immediately to prevent rusting. Thoroughly wipe the surface and then ensure your cast iron is completely dry by setting it on the stove over high flame for a few minutes.
  6. Check for rust. If any rust is present, remove it by rubbing with a mixture of coarse salt and a little bit of water or vegetable oil. Wipe out the dirty salt with a paper towel and refill with a clean salt mixture as needed until all rust is removed. Wipe out the cookware completely before re-seasoning.
  7. Re-season your cookware.

Seasoning New Cast Iron Cookware or Re-Seasoning After Cleaning

Re-seasoning your pan to bring back the cast iron's luster is as easy as oil and bake.

  1. Lather with oil or lard. Once your cast iron is completely cleaned, dried, and free of rust, apply a thin layer of shortening, vegetable oil or lard all over the entire pan – inside and out. It's important to use a very light coat of oil, and rub it in completely. If there are beads or pools of oil, wipe them out, as too much oil will make it sticky and defeat the process.
  2. Place it in the oven at 350°. Place the pan upside down on the center rack of your oven. Place a baking sheet or foil on the rack below to catch any drippings.
  3. Bake it. Bake it for one hour before letting it cool in the oven.
  4. Cool for at least two hours.
  5. Repeat 3-4 times, if desired. It's up to you if and how many times you repeat the baking process. The more times you repeat, the stronger and more evenly layered your seasoning will be.

WHERE TO BUY

Bunnings Warehouse
Mitre10
Itm
Opd
Placemakers
Archant
Ccr Nz
Counter Concepts Nz
Counties Cleaning
Pet Nz
Pet Essentials Nz
Pet Stock
Read Bros Hardware
Waikato Cleaning
Hammer Hardware
Sign Up For Our Newsletter

Join Our Mailing List