Always spot-test to ensure surface compatibility
- Use the ready-to-use solution or mix it with ambient water* per dilution chart below.
- Apply to surface. Ideally using a Simple Green foamer.
- If soaking, ensure the entire surface to be cleaned is submerged.**
- Leave on surface 1-2 minutes. If soaking, leave for 5-15 minutes. Do not allow product to dry - if it does dry, re-wet, scrub to remove residues, and rinse away.
- Heavy soil or grease may require scrubbing with a non-scratching cleaning pad or brush.
- Damp wipe or rinse off. Blot dry. (Consider using a pressure washer if available).
- Repeat the steps above if needed.
*For best results, use softened or distilled water.
**Product works at ambient temperature but heating the solution to 100°F (38°C) is a recommended practice.
To maintain formula’s non-corrosive properties, do not dilute beyond 1:3, do not exceed 110°F (43°C). If product dried on surface, re-wet, scrub, and rinse away.
Do not clean over asphalt.
FULL STRENGTH – Undiluted
Suggested Applications – Heavily soiled surfaces, oil, light wax removal, soak for light adhesive removal, parts washing, engine cleaning, concrete cleanup, ramps & traffic areas, tools & other components
1:3 DILUTION** - 32 fl. oz RTU Precision Cleaner + 96 fl. oz water
**Maximum dilution for non-corrosion to metals per AMS1526B test
Suggested Applications – Medium soiled surfaces, general wash for equipment & vehicles, regular maintenance & cleaning of floors, hand & power tools, walls, mechanical racks and countertops.
1:7 DILUTION – 16 fl. oz RTU Precision Cleaner + 112 fl. oz water
Suggested Applications – Pressure washing heavily soiled surfaces
1:12 DILUTION – 10 fl. oz RTU Precision Cleaner + 118 fl. oz water
Suggested Applications – Pressure washing lightly soiled surfaces
1:31 DILUTION – 4 fl. oz RTU Precision Cleaner+ 123 fl. oz water
Suggested Applications – Very light cleaning, window, acrylic, or plexiglass - wipe onto glass and polish dry with a clean, non-abrasive cloth