Always spot-test to ensure surface compatibility
- Mix with ambient water* per dilution chart below.
- Apply to surface. Ideally using a Simple Green foamer.
- If soaking, ensure the entire surface to be cleaned is submerged.**
- Leave on surface 1-2 minutes. If soaking, leave for 5-15 minutes.
Do not allow product to dry - if it does dry, re-wet, scrub to remove residues, and rinse away.
- Heavy soil or grease may require scrubbing with a non-scratching cleaning pad or brush.
- Damp wipe or rinse off. Blot dry. (Consider using a pressure washer if available).
- Repeat the steps above if needed.
*For best results, use softened or distilled water.
**Product works at ambient temperature but heating the solution to 100°F (38°C) is a recommended practice.
To maintain formula's non-corrosive properties, do not dilute beyond 1:6, do not exceed 110°F (43°C). ). If product dried on surface, re-wet, scrub, and rinse away.
Do not clean over asphalt.
1: 1 DILUTION - 32 fl. oz Precision Cleaner + 32 fl. oz water
Suggested Applications – Heavily soiled surfaces, oil, light wax removal, soak for light adhesive removal, parts washing, engine cleaning, concrete cleanup, ramps & traffic areas, tools & other components
1:6 DILUTION** - 18 fl. oz Precision Cleaner + 110 fl. oz water
**Maximum dilution for non-corrosion to metals per AMS1526B test
Suggested Applications – Medium soiled surfaces, general wash for equipment & vehicles, regular maintenance & cleaning of floors, hand & power tools, walls, mechanical racks and countertops.
1:15 DILUTION – 8 fl. oz Precision Cleaner + 120 fl. oz water
Suggested Applications – Pressure washing heavily soiled surfaces
1:25 DILUTION – 4 fl. oz Precision Cleaner + 124 fl. oz water
Suggested Applications – Pressure washing lightly soiled surfaces
1:63 DILUTION – 2 fl. oz Precision Cleaner + 126 fl. oz water
Suggested Applications – Very light cleaning, windows, acrylic, or plexiglass - wipe onto glass and polish dry with a clean, non-abrasive cloth