Always spot test on a hidden area first

1. Spray or foam onto surface.
2. Scrub area gently with a non-metallic brush, non-scratching scrubbing pad, or sponge to loosen any heavy build-up. When cleaning metals, tanks pipes, etc., lightly scrub along the grain.
3. Repeat steps 1 & 2 if necessary, don't let product fully dry on the surface being cleaned.
4. Rinse thoroughly with potable water for clean, shiny results.

PRO TIP: For best results when removing hard water stains or caustic residue from glass or plexiglass, use paper towels. Place paper towels in the area you want to clean one by one, apply product to the towels, keep them wet by re-applying product and leaving them in contact with the glass for as much time as possible, then complete steps 1-4 above.

NOTE 1: Simple Green Lime Calcium & Surface Residue Remover is a contact formula. The tougher the stain, the longer you should leave the product in contact with the surface you are cleaning (without allowing the surface to fully dry). This will give you the best results.

NOTE 2: Do not use on the backside of mirrors and prevent prolonged contact with natural marble, terrazzo, stone, wood, colored grout, enameled particle board, carpeting, fabric, or wallpaper. If spilled, wipe up and rinse the area with water.