Concentrated Cleaner Dilution Guide

How Concentrated Cleaners Save Money


Whether you maintain a factory floor, a commercial kitchen, or an office complex, the goal is the same: get every surface truly clean at the lowest possible cost. One of the simplest ways to do that is to switch to concentrated cleaners and dilute them correctly for each cleaning job.

Here's how concentrates compare to ready-to-use products, why chemistry matters, and how the right dilution saves money without sacrificing results.

Concentrates vs. Ready-to-Use Products

Ready-to-use (RTU) cleaners come pre-mixed, so workers can grab a bottle and go. Sometimes this convenience is necessary, but it does come at a price. With RTU products, you're paying to ship and package water along with the active ingredients, which drives up your cost per use.

Concentrates are mixed with water on site. The upfront price is higher, but one container makes many times its volume in usable cleaning solution. In large-scale operations, those savings add up quickly.

Choosing the Right Chemistry

Not all concentrates are created equal. Beyond health, safety, and sustainability, you need to consider how a formula performs once it's diluted.

Many industrial cleaners rely on high pH to do their work. That creates three problems:

  • They lose power when diluted. High-pH formulas often perform poorly at the high dilution ratios that make concentrates cost-effective.
  • They can be hazardous. High-pH concentrates are often classified as corrosive, which makes them riskier to store, handle, and use.
  • They can leave residue. Their base ingredients are typically solids dissolved in water during production, which can make them harder to rinse away completely.

How Simple Green Works Differently

Simple Green concentrated cleaners and degreasers don't rely on high pH. Instead, they remain safer and effective both as concentrates and at high dilution ratios.

The secret is our proprietary blend of liquid surfactants. "Surfactant" is short for surface active agent. When you dilute Simple Green, the water you add becomes the solvent that carries soil away. Our surfactants penetrate and wet the surface, letting water surround dirt and oil particles that would normally repel it. The suspended grime then rinses or wipes away easily, with no residue left behind.

Simple Green products are backed by a wide range of third-party certifications, seals, and testing, which is why facilities have trusted Simple Green for cleaning and degreasing for more than 50 years.

Why Proper Dilution Matters

The beauty of a concentrate is that one product can be adjusted for any job: a heavy-duty mix for stubborn grease, a medium-strength solution for general cleaning, or a light dilution for daily maintenance. But results depend on getting the ratio right.

  • Too strong (under-diluted): An overly concentrated solution can strip floor finishes, damage paint, or corrode some materials. It can also expose workers to unnecessary fumes or residue.
  • Too weak (over-diluted): A solution that's too weak may leave behind grime, bacteria, or stains. In regulated industries like food service and healthcare, that can lead to compliance issues.
  • Inconsistent: Guessing at ratios produces uneven results, making it hard to hold every area of a facility to the same standard.

The Savings, by the Numbers

Diluting Simple Green Industrial Cleaner & Degreaser at 1:10 cuts the cost per gallon by about 90%. Let’s say a 5-gallon pail retails for approximately $150, or $30 per gallon. Mixed at 1:10 for general cleaning, that same pail makes 55 gallons of ready-to-use solution.

Volume Cost Per Gallon
Concentrate, as purchased 5 gal $30.00
Diluted 1:10 for general cleaning 55 gal $2.73

Concentrates also simplify purchasing. Instead of stocking a different RTU product for every task, facilities can keep a few concentrates on hand and adjust the dilution as needed, cutting both inventory costs and storage space.

One Concentrate, Many Jobs

Concentrates offer flexibility that RTU products can't match. A single product can handle floors, walls, and equipment, just by changing the ratio.

For example, a facility might use a heavy-duty mix to cut through grime on machinery one day, then switch to a lighter solution for routine floor care the next. Fewer products to buy, train on, and track means a leaner, more efficient cleaning program.

Less Packaging, Smaller Footprint

Because one container of concentrate replaces many bottles of RTU product, concentrates cut packaging waste. Fewer containers also means fewer reorders and shipments, which lowers your carbon footprint and can help your company meet its sustainability goals.

Diluting Safely and Staying Compliant

Proper handling and accurate dilution protect both your people and your surfaces. Simple Green makes it easy at every scale:

  • Measuring tools: Basic measuring cups or jugs work well for small batches.
  • Pre-marked trigger bottles: Simple Green secondary trigger bottles have fill lines for heavy, general, and light cleaning, so workers mix the right strength every time.
  • Secondary labels: A full range of labels for diluted solutions helps you stay compliant with local regulations.
  • Proportioning equipment: Automated dilution systems mix concentrate and water at precise ratios, removing human error. Simple Green offers single product wall proportioners, 4+1 wall proportioners, and handheld portable proportioners to meet your dilution needs.

Automated systems ensure every batch is mixed correctly, reducing exposure to overly concentrated chemicals and cleaning surfaces effectively without damage.

The Smart Choice for Industrial Cleaning

Concentrated cleaners deliver a combination of cost savings, versatility, and sustainability that RTU products can't match. When margins are thin and efficiency matters, mastering dilution helps you get the most out of every drop.

Ready to make the switch? Explore Simple Green's industrial cleaning solutions, or contact our team to find the right setup for your facility.