HOW TO CLEAN BAMBOO FLOORS

Bamboo flooring is as durable as hardwoods like oak and maple, and is often more resistant to water damage than most woods. But bamboo floors still require regular maintenance to keep them shiny and clean.

The main culprit in the deterioration of any wood flooring is tiny particles of dust and dirt that are tracked into the room from footwear. Over time, the buildup of dust and dirt can wear down and dull the appearance of the bamboo floors.

To protect your bamboo floors, always use a damp (almost dry) mop when cleaning. Avoid wet mopping or using a steam mop, as excessive moisture can cause warping or promote mold growth over time.

Bamboo floors can be damaged by harsh chemicals, so you should always use a pH-balanced cleaner. It's also important to avoid cleaning with oil, soap, ammonia-based cleaners, wax-based products, bleach, and acidic materials such as vinegar, as these can damage the bamboo.

To clean bamboo without damaging the finish, choose a cleaner designed for the job. Simple Green Multi-Surface Floor Care uses plant-based extracts, essential oils, and minerals instead of petroleum distillates, ammonia, or chlorine commonly found in other floor cleaners. It cleans hard floor surfaces without dulling the finish or leaving a residue. The formula dries quickly, resulting in a spotless and streak-free finish that allows the natural beauty of the flooring to shine through.

While sponge mops can be used, best results are achieved with a washable microfiber pad or disposable mopping pad. On highly reflective or glossy floors, follow with a damp mop using clean water as a final rinse to enhance shine. Simple Green Multi-Surface Floor Care does not contain waxes or polishing agents.

Directions for Cleaning Bamboo Floors:

Tip: Always read and follow label instructions and spot test in a small, hidden area before full application to ensure surface compatibility.

1. Clear loose dirt and dust. Use a vacuum, soft-bristled broom or microfiber mop to clear the floor. Do not use a vacuum with beater bars, as the bristles could wear down the finish of the flooring.
2. Dampen mop. Dampen your microfiber mop pad with clean water.
3. Apply solution. Spray Simple Green Multi-Surface Floor Care directly on your floor.
4. Mop. Work in small sections to gently move the mop head back and forth across the floor until the cleaner is evenly spread and any visible spray marks are gone.
5. Mop with water. Use a clean, damp microfiber mop to go over the same sections to ensure there is no residue left.
6. Air dry. Allow the floor to completely dry before walking across the surface.