Products

Simple Green >> Household >> All Products
Simple Green® Oxy Solve Concrete and Driveway Cleaner

Simple Green® Oxy Solve Concrete and Driveway Cleaner

Simple Green Oxy Solve Concrete and Driveway Cleaner utilizes the natural power of peroxide to provide high-performance cleaning and stain removal without toxic or abrasive chemicals that can be found in other pressure washer cleaning products. It has earned the U.S. EPA's Safer Choice label, verifying both its safety and performance, so you don't have to worry about harming the environment or endangering people, pets or wildlife. It goes on as a fast-acting, phosphate-free foam, removing tough, built up grime and stains and then dissipates quickly for easier rinsing and less water use.
  • Safer, non-toxic* and biodegradable formula earned the U.S. EPA's Safer Choice label
  • Uses the natural power of peroxide to lift grime and remove stains and discoloration
  • Eliminates tough oil stains, grease, automotive fluids, tire marks, exhaust build-up and more
  • Cleans and renews concrete, asphalt, brick, block, pavers, stone and more
  • Meets the U.S. EPA's Direct Release criteria for discharge to the environment, designed to protect aquatic life and other sensitive environments
  • Will not harm plants, lawns, pets or wildlife
  • Concentrated formula makes up to 21 gallons of product, cleaning up to 6,400 sq. ft.
Simple Green Oxy Solve Concrete and Driveway Cleaner's orally non-toxic and biodegradable formula safely cleans, removes stains and rejuvenates driveways, walkways, patios and masonry such as walls, fountains and statues. It eliminates tough oil stains, grease, automotive fluids, tire marks, exhaust build-up and more.

Safe to use on concrete, asphalt, brick, block, pavers, stone and more, and will not damage stucco, wood, vinyl, metal or other home exterior surfaces. The biodegradable formula also won't harm plants, lawns or trees.

The concentrate can be used with pressure washing or manually, for touch-ups in between large jobs. One gallon of the concentrated formula makes up to 21 gallons of product, cleaning up to 6,400 sq. ft.

Available at these and other local stores.

Directions for Use

DIRECTIONS – READ BEFORE USE:Protect eyes with glasses or goggles. Keep others and animals away from work site. It is best to pressure wash under cooler, non-windy conditions. Do not allow cleaner to dry on surface before rinsing. Always test on an inconspicuous area first. Do not mix with bleach or any other chemicals.

IMPORTANT TIPS: For vertical surfaces, apply solution from lower to higher areas and rinse from higher to lower areas to prevent streaking. After the job is done, rinse all lawn, plants, shrubs and trees contacted by the cleaner, and flush equipment with water before storage. Runoff may temporarily discolor some asphalt sealers – divert runoff or test in a small area first. Pressure washing may remove oxidized paint and weathered stains.

PRESSURE WASHING:

  1. Drop the siphon tube into the bottle or fill the on-board "soap reservoir".
  2. Switch equipment to plain water at low pressure and wet surface.
  3. At low-pressure setting, apply Simple Green Oxy Solve to an area that is small enough to be rinsed before it dries.
  4. Allow cleaner to dwell on surface for 3-5 minutes.
  5. Rinse at high pressure, keeping the nozzle at least 2 feet from the surface and the spray perpendicular to the surface.

MANUAL CLEANING: Mix 1-measure of Simple Green Oxy Solve with 20-measures of water in a bucket (example: 1.5 cups Simple Green to 2 gallons water). Clean in sections with a soft-bristle brush or sponge. Do not allow cleaner to dry on surface before rinsing. Rinse with a garden hose at highest pressure. Move to a new section and repeat.

Ingredients

  • Water
  • Ethoxylated alcohols
  • Hydrogen peroxide solution
  • Tretrasodium N,N-bis(carboxymethyl)-L-glutamate
  • Citric acid
  • Etidronic acid